NEW UPDATE DOESNT REQUIRE DCSD - NO NEED DCSD for A10/A11 Devices Only.


Guide (AUTO METHOD ONLY) :
Step 1: Connect Device in "RECOVERY MODE"
Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 3: Click "Purple Mode" Button

This Step NO NEED DCSD for iPhone 7-X (A10/A11)
DCSD for iPads and iPhone 6s, 6s Plus Needed
After Successful Write, Device Automatically Enters Recovery Mode

Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 5: Click "Run PwnDFU" Button
Step 6: Click "Boot Device" Button
Step 7: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ✔️)
Step 8: Click "HELLO BYPASS"

Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————

Guide (MANUAL METHOD ONLY) :
Step 1: Connect Device in "NORMAL MODE"
It Will Show Serial To Change Manually
Step 2: Connect Device in "RECOVERY MODE"
Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 4: Click "Purple Mode" Button

You Can Connect DCSD Now and Click OK or Click Close.
Click Close and Connect DCSD Cable for Manual Methods

Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1

PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.

Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)
This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.

Step 7: Connect Device in "RECOVERY MODE"
Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 9: Click "Run PwnDFU" Button
Step 10: Click "Boot Device" Button
Step 11: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ✔️)
Step 12: Click "HELLO BYPASS"

LPro Magic Hello is a simple tool first in the world to bypass iOS 15 on hello screen

Phone will support iCloud login and APP Store application

DCSD Cable need for this operation

Lpro Magic Hello V1.0

GUIDE TO FOLLOW:

Step 1: Put DFU Mode

Step 2: Preload PwnDFU

Step 3: Preload Device(The Device Screen Will Turn Purple)

Change USB Cable > To > DCSD Cable at This Stage. Proceed to Step 4

Step 4: Preload Check(The Device Will Restart)

Preload Check Button The Function is to change the Serial Number of the Device

After the operation is Complete, the Device will automatically Restart

Step 5: Enter DFU Mode Again

Step 6: Run PwnDFU

Step 7: Boot Device

Step 8: Check SSH (Wait for the Button to light up to become this Check SSH ✔️)

Step 9: Activation Device

Wait for the Device to turn on and the Device is Successfully Activated

—————————————————————

ALTERNATIVE METHOD

—————————————————————

Step 1: User manually changes the Serial Number provided by us

Step 2: Then Restart the Device

Step 3: Click Preload Check

Then restart the device to enter DFU mode, and start the following steps to Activate the Device

1. Run PwnDFU

2. Boot Device

3. Check SSH (Wait for the Button to light up to become this Check SSH ✔️)

4. Activation Device

Wait for the Device to turn on and the Device is Successfully Activated

*On some devices Notifications can be not working, we are improving this in next updates in future

TOOL LINK 

https://mega.nz/folder/Qt4AETSC#7YJoPPTFDn1x_kws03MwSg